Pentair Intellitouch ScreenLogic - Manual (Page 108)

98
IntelliTouch ScreenLogic User’s Guide
Connecting remotely to your system
Using the “ScreenLogic Connect” utility you can control your pool and spa operations remotely from your laptop
computer over the Internet or from your local networked computer in your house. You can download the remote
connection utility from www.pentairpool.com.
To connect remotely to your system:
1. After installing the “ScreenLogic Connect” utility, click the
“ScreenLogic Connect” icon on your desktop to start the
program.
2. Enter your ScreenLogic system name in the “System Name”
box. The name must be entered as follows: Pentair: xx-xx-xx
The Protocol Adapter Address (xx-xx-xx) is the last six digits
of the Protocol Adapter serial number found on the Protocol
Adapter.
3. In the “Password” box, enter the system password that you
assigned in the "Set Remote Access Password" dialog in the
“General Settings (step 1 of 5)” dialog box. See page 33 for
details, or leave the box blank if no password has been assigned.
4. Click the “Remember Login info” check box to save your system name and password so that you don’t have
to enter the information each time you want to connect.
5. Click the “Start ScreenLogic” button to connect to your system and start ScreenLogic. Click the “Options”
button, then click the “Configure ScreenLogic” button if you want to configure your system using the
“Configurator” utility (see page 32 for more information).
To connect to your system via your local network:
1. Enter your ScreenLogic system name in the “System Name”
box. The name must be entered as follows: Pentair: xx-xx-xx
The Protocol Adapter Address (xx-xx-xx) is the last six digits
of the Protocol Adapter serial number found on the Protocol
Adapter.
2. Click the “Options” button. The ScreenLogic Connect program
will recoginze and automatically populate the system name in the
“Local Systems” box.
3. Click the “Remember Login info” check box to save your
system name and password so that you don’t have to enter the
information each time you want to connect.
4. Click the “Start ScreenLogic” button to connect to your system
and start ScreenLogic. Click the “Configure ScreenLogic”
button if you want to configure your system via the
“Configurator” utility (see page 32 for more information).