Pentair Intellitouch ScreenLogic - Manual (Page 22)

12
IntelliTouch ScreenLogic User’s Guide
Button Description Default Action
Cradle USB (ActiveSync) interface: Push to Enable USB (ActiveSync) link between PC and Cradle with
device secure on Cradle. Not used by IntelliTouch ScreenLogic program.
Launches Internet Explorer Browser: Only works if you are connected to a Broadband Internet
connection.
Minimize: Desktop Minimize current application and return to Desktop. Does not work when IntelliTouch
ScreenLogic is running.
Suspend or Power/Reset:
• Quick Push enters or exits Suspend Mode
• Push and Hold to Power Off device (hold for about four seconds until display goes off); then Push to
restart and complete (Cold) Boot process. (Only required if Tablet stops responding)
Record (Right-Edge) Button: Not used by IntelliTouch ScreenLogic.
Tablet Lights
There are three lights (LEDs) on the Tablet:
• Record LED: The record LED (left LED) is accessible by applications. A green LED indicates that the
Digital Tablet is recording from its internal microphone.
• Network LED: When the network LED (middle LED) is solid green it indicates that the network adapter is
detected and functional.
• Battery LED: When the battery LED (right LED) is solid green, it means that the batteries are fully charged.
When it is blinking amber, it indicates that the battery is charging. This will only happen when the Digital
Tablet is plugged into the AC power. In the absence of AC power, the steady green state indicates a full or
good battery level; when the battery charge is low, it will glow a steady amber; when the battery level is
critically low, it will blink in amber rapidly.
Tablet Functions (Continued)
6
7
8
9
10