Pentair Intellitouch ScreenLogic - Manual (Page 84)

74
IntelliTouch ScreenLogic User’s Guide
Setting the Egg Timer (Count Down)
The Egg Timer count down feature allows you to define the run time for different circuits. For example, whenever
you manually switch your spa on, you would like it to automatically turn off in two hours. Use the Egg Timer circuit
to set an automatic shut-off time. The time period can be anywhere from 1 minute to 24 hours. The Egg Timer is
also a useful feature for turning off lighting and spa jets. For example, a jet pump can be set to turn off in 15 minutes,
even when turned on by the spa-side remote control. All Egg Timer circuits are factory-set to 12 hours.
To set the Egg Timer count down:
1. From the main screen, tap the Schedule tab.
2. Tap the Egg Timer tab. A list of scheduled circuits is displayed.
3. To set a new count down time for a circuit, first select the circuit from the list. Tap the Less Time or More
Time to increase or decrease the run time. The scheduled Run Time displays the time that the circuit is due to
run.
To set the Don’t Stop feature:
1. From the main screen, tap the Schedule tab.
2. Tap the Egg Timer tab. A list of scheduled circuits is displayed.
3. Select the circuit from the list and tap More Time until the run time is increased pasted 23 hours 45 minutes.
Don’t Stop will be displayed. The selected circuit is now set to run continuously.