Panasonic KX-P8410 - Manual (Page 113)

113
Care and Maintenance
■ Jam at D
Safety Caution:
B The fuser is hot. To avoid personal injury, turn off the printer and wait 10
minutes (after opening the front door) for the fuser to cool before touching it.
Note:
B
First check the exit opening for media that has jammed and folded like an
accordion. It is especially difficult to see if the media is transparency film.
(Printing face down)
# Open the front door.
$ Pull open the access door (above the plastic output tray); see
if the media is visible.
% Turn the large green knob on the fuser counterclockwise.
& Remove the media from inside the access door.
1
A
#
$
%
&