Panasonic KX-P8410 - Manual (Page 124)

124
Care and Maintenance
If the communication link between your computer and
the printer is working but the printer ejects a blank page
when printing from your application or through Windows.
Make sure that the appropriate driver is installed and that
you have selected the printer correctly.
Corrective Action
Make sure that you plugged in the printer and turned it on. Printer not operating.
Trouble
Make sure that you connected the interface cable(s)
properly.
More info to come for
these messages.
■ If you can’t make a print
Corrective Action Trouble
Follow the procedure below and
disable the
bi-directional interface. (The Status
Display function becomes ineffective.)
Windows 95:
1. Click Start, select Settings, then
click Printers.
2. Click the Panasonic KX-P8410 icon.
3. Click the File menu, then click
Properties.
4. Click the Details tab and Spool
settings... .
5. Click Disable bi-directional
support for this printer, then click
OK.
Windows 3.1:
1. Double-click
Status display setup icon
in the KX-P8410 Utilities program
group.
2. Click the Device tab.
3. Click off the Monitor Printer check
box.
4. Click OK.
Windows NT 4.0:
1. Click Start, select Settings, then
click Printers.
2. Click the Panasonic KX-P8410 icon.
3. Click the File menu, then click
Properties.
4. Click the Ports tab.
5. Click off the Enable bidirectional
support check box.
6. Click OK.
The computer is not
properly
communicating with
the printer. The printer does
not print
correctly.
Possible Cause