Panasonic KX-P8410 - Manual (Page 136)

136
B
Close all applications
except for the one which
controls the printer, then
print it again.
B
Turn off the computer,
then turn it on again.
Print the document
again.
Follow the procedure
below to make the setting
active.
1. Click Start, select
Settings, then click
Printers.
2. Click the Panasonic
KX-P8410 printer icon.
3. Click the File menu,
then click Properties.
4. Click Details tab and
Spool settings....
5. Click Enable bi-
directional support for
this printer, then click
OK.
Error message Possible cause Recovery
Unable to Allocate
Memory!!
Care and Maintenance
B
Cable connection is
improper or the
printer is not ready.
B
The terminator
setting is improper.
There was an error
writing to LPT1: for the
printer (Panasonic
KX-P8410):
There was a problem
sending your document
to the printer. Make sure
the printer cable is
connected and the
printer is online. To
continue printing, click
retry. Windows will
automatically retry after
5 seconds Connect the printer
(parallel cable) correctly or
make the printer ready. Cable connection is
improper or the printer
is not ready.
The memory for
printing is insufficient.
The Status Display
does not appear when
printing a document. The Status Display
function is not active
■ Some application settings may take priority over the printer driver settings.
There was an error
writing to KXP8410GDI:
for the printer
(Panasonic KX-P8410):
The printer is not ready.
Make sure it is turned
on and online. To
continue printing, click
retry. Windows will
automatically retry after
5 seconds Perform the following
procedure.
1. Confirm that the
terminator is correctly
set.
2. Confirm that the printer
is ready.
3. Confirm that the printer
is correctly connected
with a SCSI cable.
4. Turn off the computer,
then turn it on again.