Panasonic KX-P8410 - Manual (Page 29)

The multi-purpose tray (MPT) serves as an additional tray for loading any type of
media that ranges in size from 91 mm x 254 mm to 216 mm x 356 mm (3.6
″
x 10
″
to
8.5
″
x 14
″
). Use it to load a single sheet or a stack of media, depending on the
media’s type and thickness.
Use the multi-purpose tray to accomplish the following:
Print on standard and special media
B
Standard media

Laser paper [75 to 165 g /m 2 (20 to 44 lbs.)]
B
Special media

Labels

Envelope (#10 size) [Black Text only]

Transparency (The print quality may not be stable. Use the media tray for
best reliability.)
Two-sided printing (doubles-sided) on laser paper
You should not expect the same print quality and reliability that you get with one-
sided printing. For details, refer to
page 156 .
Setting media thickness switch
Because the printer accommodates various media weights from the multi-purpose
tray, media thickness can be manually selected for the most reliable paper-picking.
Follow these steps:
Open the left side door ( # ). The green media thickness switch is
located on the paper feeder and has three settings:
Move the switch to the desired setting.
Close the left side door.
Laser paper 91 to 123 g /m 2 (25 to 32 lbs.)
Transparency, Label
29
Setup
1
2
3
Thin
Middle
Thick
Loading Media in the Multi-purpose Tray
#
Laser paper 75 to 90 g /m 2 (20 to 24 lbs.)
Laser paper 124 to 165 g /m 2 (33 to 44 lbs.)
Envelope
Thin (Default)
Switch setting
Middle
Thick
Media