Panasonic KX-P8410 - Manual (Page 60)

60
Usage=xx%
Outline for Menus
Test Page
Prints general information on printer settings and configuration.
Color Calibration
Adjusts the toner density for each color independently or all the colors.
■ Calibration Offset
Adjusts the density for all the colors (CYAN, MAGENTA, YELLOW and BLACK).
Setting a higher number provides darker colors and setting a lower number
provides lighter colors.
■ CYAN / MAGENTA / YELLOW / BLACK
Adjusts the density for each color independently. Setting a higher number provides
darker color and setting a lower number provides lighter color.
■ Calibration Test Print
Prints a Color Calibration Page with the current density settings.
■ Reset Calibration
Setting YES resets the current settings back to the default settings.
Note:
B The color density setting affects the average life of toner.
System Setting
Configures the printer.
■ Energy Star
If Energy Star is enabled, the printer enters the Energy Star mode when the printer
is idle for 30 minutes.
■ Auto Continue
With the Auto Continue set to ON, the printer automatically recovers from the
following error conditions if no recovery operation is done for 10 seconds.
B
Memory Overflow
B
SCSI communication error
■ Data Timeout
With the Data Timeout set to ON, the printer automatically returns to Ready status if
the printer does not receive any data from a computer within the time period set in
this selection (30 to 240 seconds).
Using the Printer
xxxxxx
Usage=xx%
Usage=xx%
Usage=xx%
Page Count
Imaging Unit
Transfer Unit
Fuser Unit
Oil Roll
Maintenance
Item Menu Selection 2 Menu Selection 1 Menu Main Menu