Using the printer, Menu mode – Panasonic KX-P8410 User Manual
Page 59
59
Main Menu
Using the Printer
Menu Mode
The Menu mode includes a Main menu, Item menu, Selection 1 menu and Selection
2 menu which can be changed from the printer panel.
When Ready is displayed in the upper line of the LCD, pressing the MENU/EXIT
button will allow you to enter the Menu mode.
Once in the Menu mode:
B
Press the
F
/CONTINUE button to:
Display the next menu.
Display the next item.
Increase the numerical value of the selection by 1 or display the next selection.
B
Press the
I
/CANCEL button to:
Display the previous menu.
Display the previous item.
Decrease the numerical value of the selection by 1 or display the next selection.
B
Press the ENTER button to:
Enter a sub - menu.
Activate a selection.
Print a Configuration/Color Calibration Page.
Before you attempt to change any settings, check the factory default settings in the
following table. For details on changing the settings, refer to Outline for Operation
Once you have changed the printer panel settings, they are automatically saved as
user default settings even if the power is turned off.
Item Menu
Test Page
Selection 2 Menu
Selection 1 Menu
Configuration Page
Calibration Offset
CYAN
MAGENTA
YELLOW
BLACK
Calibration Test Print
Reset Calibration
0*
1
(-5 to 5)
0*
1
(-10 to 10)
0*
1
(-10 to 10)
0*
1
(-10 to 10)
0*
1
(-10 to 10)
YES
NO
Energy Star
Auto Continue
Color Calibration
ON*
1
Data Timeout
System Setting
OFF
ON
OFF*
1
ON
30*
1
(30 to 240s)
OFF*
1
IP Address
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
Network *
2
Subnet Mask
Default Gateway
*
1
Factory default setting
*
2
This menu appears when the optional network card is installed.
(continued)