Perle Systems IOLAN SCS - Manual (Page 170)

Serial Port Profiles
170 IOLAN SDS/SCS/STS User’s Guide, Version 3.6
Remote Access (PPP) Profile
Overview
The Remote Access (PPP) profile configures a serial port to allow a remote user to establish a PPP
connection to the IOLAN’s serial port. This is typically used with a modem for dial-in or dial-out
access to the network or a wireless WAN card.
Functionality
There are two options for PPP user authentication:
1. You can configure a specific user/password and a specific remote user/password per a serial port.
2. You can create a secrets file with multiple users and their passwords that will globally
authenticate users on all serial ports.
You can use configure PPP authentication in the configuration or in the secrets file, but not both.
If you want to use a secrets file, you must download the secrets file to the IOLAN for CHAP or PAP
authentication; the files must be downloaded to the IOLAN using the names
chap-secrets and
pap-secrets , respectively. The file can be downloaded to the IOLAN under the Custom Files
option by selecting the Download Other File parameter.
In the Remote Access (PPP) profile, you must also specify the Authentication option as PAP or
CHAP on the Authentication tab, but must leave the User , Password , Remote User , and Remote
Password fields blank.
An example of the CHAP secrets file follows:
# Secrets for authentication using CHAP
# client server secret acceptable local IP addresses
barney fred flintstone1234567890 192.168.43.1
fred barney wilma 192.168.43.2
An example of the PAP secret file follows:
# Secrets for authentication using PAP
# client server secret acceptable local IP addresses
barney * flintstone1234567890
fred * wilma
Default State Sets the default state of the plug.
Data Options: On, Off
Default: Off
Associated Port When a server or router has its console port connected to one of the serial ports
on this IOLAN and that server/router is also powered by this RPS, the
server/router serial port number should be entered here. This will give you
direct access to some RPS commands when managing that server or router
(using Telnet or SSH).