Accessories, Introduction, Installing a perle pci card – Perle Systems IOLAN SCS User Manual
Page 379: Appendix h accessories, Bed in
IOLAN SDS/SCS/STS User’s Guide, Version 3.6
379
Accessories
Appendix H
H
Introduction
This chapter provides information about peripheral IOLAN options that can be ordered separately
from the product. Contact your sales representative to find out how to order the products listed in this
appendix.
Installing a Perle PCI Card
This sections describes how to install the Perle IOLAN modem card and the Perle PCI adapter card,
used with a wireless WAN card, in your SCS rack mount model.
The location and brackets are slightly different for the 32-port and 48-port SCS rack mount models,
but the basic installation concept is the same. The PCI adapter card bracket is found on the serial side
of the 8-port/16-port/32-port models and the LED side of the 48-port model.
1.
Unscrew the six screws on the top of the SCS IOLAN.
Note:
Do not touch any of the components within the SCS IOLAN while performing the PCI
adapter card installation.
IOLAN Modem Card
PCI Adapter Card