Perle Systems IOLAN SCS - Manual (Page 303)

IOLAN SDS/SCS/STS User’s Guide, Version 3.6 303
Controlling the RPS, I/O
Channels, and IPsec
Tunnels
Chapter 14
14
Introduction
The Control section appears when the IOLAN is connected to a Remote Power Switch and/or an I/O
model or you want to control the IPsec tunnel.
RPS Control
Overview
When a Remote Power Switch’s (RPS) console port is attached to the IOLAN’s serial port and the
serial port is configured for the Power Management profile, you will be able to control the RPS’s
power plugs either universally or individually (power on/off the whole RPS or individual plugs).
Field Descriptions
The following buttons are available:
On Button Turns all the RPS plugs on.
Off Button Turns all the RPS plugs off.
Cycle Button Turns all the RPS plugs off and then on.
Reset to Default
State Button Resets all the RPS plugs to the default state as configured in the Power
Management profile settings.
Plug Control Button Displays a window that allows you to manage the individual plugs on the RPS.