Ip settings, Ipv4 settings, Overview field descriptions – Perle Systems IOLAN SCS User Manual
Page 82: And ethernet information. see
IP Settings
82
IOLAN SDS/SCS/STS User’s Guide, Version 3.6
IP Settings
IPv4 Settings
Overview
The parameters in IPv4 settings are used to access the IOLAN and are how the IOLAN accesses the
network.
Field Descriptions
Configure the following parameters:
System Name
The
System Name
is used for informational purposes by such tools as the
DeviceManager and is also used in conjunction with the Domain field to
construct a fully qualified domain name (FQDN).
Default: localhost
Domain
This field is combined with the
System Name
to construct the fully qualified
domain name (FQDN). For example, if the domain is mycompany.com and
the
Server Name
is set to accounting, the FQDN would be
accounting.mycompany.com.
Obtain IP Address
automatically using
DHCP/BOOTP
When enabled, the IOLAN will request an IP address from the DHCP/BOOTP
server. By default, when this option is enabled, the IOLAN will also attempt to
retrieve the DNS server, WINS server, and default gateway from the
DHCP/BOOTP server.
Default: Disabled
Use the following
IP Address
Assign a specific IP address to the IOLAN.
Field Format: IPv4 address
IP Address
The IOLAN’s unique IPv4 network IP address.
Field Format: IPv4 address
Subnet Mask
The network subnet mask. For example, 255.255.0.0.