Hardware and connectivity, Introduction, Iolan components – Perle Systems IOLAN SCS User Manual
Page 31: What’s included, What you need to supply, Chapter 2 hardware and connectivity
IOLAN SDS/SCS/STS User’s Guide, Version 3.6
31
Hardware and
Connectivity
Chapter 2
2
Introduction
This chapter describes how to physically set up your IOLAN unit. It includes an overview of the
IOLAN hardware components and how to power up the IOLAN to make sure it works correctly.
IOLAN Components
What’s Included
The following components are included with your product:
z
IOLAN unit
z
External power supply (1-, 2-, and 4-port models only)
z
Quick Start Guide (for I/O models, a soft copy exists on the CDROM)
z
Warranty Card
z
A CD-ROM containing documentation, firmware, configuration software, TruePort, etc.
z
IOLAN models that have an RJ45 serial connector(s) come with an RJ45
J
DB9F adapter
Added components for rack mount models:
z
3’ CAT5 RJ45 Administration cable
z
Rack mounting kit
z
(SCS models only) IOLAN Cable Starter Kit (see
Appendix H, Accessories on page 379
pinout diagrams).
What You Need to Supply
Before you can begin, you need to have the following:
z
A serial cable(s) to connect serial devices to your IOLAN unit
z
An Ethernet CAT5 10/100/1000BASE-T cable to connect the IOLAN unit to the network
Note:
SDS P (Power Over Ethernet) models and I/O models do not have an external power
supply.