Panasonic KX-TA308 - Manual (Page 109)

1.9 DSS Console Features
Operations 1-101
Operator / Manager
/ DSS Console Operations
• DSS buttons can be changed to any of the following function buttons by Initial Settings.
a) Another DSS Button (Every DSS button can be assigned to another extension number.)
b) One-Touch Dialing Button
c) Day Button (Operator/Manager only)
d) Night Button (Operator/Manager only)
e) Lunch Button (Operator/Manager only)
f) Station Lock Button (Operator/Manager only)
• PF buttons can be changed to One-Touch Dialing buttons by Initial Settings.
• When the STORE button is pressed after programming, you will hear beep tones as follows.
— 1 beep: The entry is different from the one that was stored previously.
— 2 beeps: The entry is the same as the previously stored one.
• You can check the stored data by pressing the desired button while on-hook. The data will
be displayed.
• 1.2 Proprietary Telephone Settings, “Customizing the Buttons on Your Telephone”,
DSS Button,
One-Touch Dialing Button
! !
☞
An extension can be called and accessed, by simply pressing a DSS button. The BLF
shows if the extension is engaged.
PT and DSS Console
Press the desired DSS button.
[DSS Console]
Lift the handset or press
SP-PHONE/MONITOR.
[Paired Telephone]
PT and DSS Console
Press the desired DSS or PF button.
[DSS Console]
Lift the handset or press
SP-PHONE/MONITOR.
[Paired Telephone]
The stored number is dialed automatically by pressing a programmed DSS or PF button.
One-Touch Dialing
Direct Station Dialing