Panasonic KX-TA308 - Manual (Page 75)

1.7 Useful Features
Operations 1-67
Advanced Operations
PT
account code
Enter an account code (4 digits). Press FWD/DND.
During a conversation or while hearing a reorder tone after the other party hangs up
(within 30 seconds)
FWD/DND
• You can keep talking.
Making calls with account codes in the Option mode and receiving calls
Calling with Account Codes (Account Code Entry)
An account code is used to identify outside calls for accounting and billing purposes. The
account code is appended to the “Station Message Detail Recording (SMDR)” call record. For
incoming outside calls, account codes are not required. For outgoing outside calls, account
codes are often required. You can enter account codes in the following 4 modes.
Verify - All mode: You must always enter the pre-assigned account code.
Verify - Toll mode: You must always enter the pre-assigned account code. You can enter
your extension password so that you can override toll restriction.
Option mode: An account code can be entered when a record of the account code is required.
It can be any number.
Forced mode: You must always enter an account code. It can be any number.
Making calls with account codes except in the Option mode
PT and SLT
account code
Enter an account
code (4 digits). Dial tone
For a PT: Press FWD/DND or PAUSE.
For an SLT: Dial 49 or . Lift the handset or press
SP-PHONE/MONITOR. Press CO or enter a line
access code
(9, 0 or 81 through 86).
Enter the phone number.
phone no.
line access code
CO
For an SLT
For a PT
4 9 or
or
PAUSE FWD/DND