Panasonic KX-TA308 - Manual (Page 31)

Operations 1-23
1.3 Making Calls
Basic Operations
Dialing with System Speed Dialing (System Speed Dialing)
Allows you to make a call using pre-programmed speed dial numbers. This system supports
100 speed dial numbers which are available to all extension users.
PT and SLT
Lift the handset or press
SP-PHONE/MONITOR.
system speed dial no.
Enter a system speed dial number
(00 through 99).
AUTO DIAL
STORE
For an SLT
For a PT
For a PT: Press AUTO DIAL/STORE.
For an SLT: Dial .
• You will not hear a tone.
• The AUTO DIAL/STORE indicator lights. • The AUTO DIAL/STORE indicator
light turns off.
• System Speed Dial numbers must be stored by System Programming.
• “Speed Dialing”, “One-Touch Dialing” and manual dialing can be used together.
• You may press a CO button or dial a line access code to select a desired outside (CO) line
before pressing the AUTO DIAL/STORE button or dialing .
• It is possible to cancel toll restriction with this feature (Toll Restriction Override for System
Speed Dialing). In this case, System Programming is necessary.
• A System Speed Dial number can be divided when stored.
<Example>
If the number is divided and stored in System Speed Dial numbers 01 and 02,
Press: [AUTO DIAL/STORE] [0] [1] [AUTO DIAL/STORE] [0] [2].
• The dialed number appears on the display.
• A rotary telephone cannot use this feature.
• See the Installation Manual, Section 3, “Toll Restriction for System Speed Dialing”.
• See the Installation Manual, Section 3, “System Speed Dialing”.
SLT
PT
PT
! !
☞