Panasonic KX-TA308 - Manual (Page 32)

1-24 Operations
1.3 Making Calls
• An account code must be stored by pressing “ ” and entering the account code after the
line access code.
• You can store an extension number, telephone number, or feature number of up to 16 digits.
Valid digits are “0 through 9”.
• A pause can be stored by pressing the key. However, in the account code verify-all,
verify-toll and forced modes, “ ” is not regarded as a pause.
• To store the telephone number of an external party, a line access code (9, 0 or 81 through
86) must be stored as the first digit.
• The number of Personal Speed Dialing numbers corresponds to the number of PF buttons
assigned as One-Touch Dialing. (PF buttons are on a proprietary telephone.) You cannot
assign both the One-Touch Dialing and Personal Speed Dialing features to the same
number. For example, if you assign One-Touch Dialing to the PF 1 button and then Personal
Speed Dialing 0, only the Personal Speed Dialing 0 feature will be assigned.
• A rotary telephone cannot use this feature.
• 1.2 Proprietary Telephone Settings, “Customizing the Button on Your Telephone”,
One-Touch Dialing Button
• See the Installation Manual, Section 3, “Personal Speed Dialing”.
SLT
PT
! !
☞
Allows you to store up to 10 speed dial numbers at your extension. These numbers are
available for your extension only.
Storing a phone number
Any Telephone
Confirmation
tone Lift the handset
or press
SP-PHONE/MONITOR.
2 #
Dial 2 . Enter the personal speed
dial number (0 through 9).
personal speed dial no.
Enter the
desired number.
desired no.
Dial #. Hang up or press
SP-PHONE/MONITOR.
Any Telephone
Lift the handset or press
SP-PHONE/MONITOR.
#
Dial #. Enter the personal speed
dial number (0 through 9).
personal speed dial no.
• You may dial “1 ” instead of “#”.
Dialing
Dialing with Personal Speed Dialing (Personal Speed Dialing)