Panasonic KX-TA308 - Manual (Page 49)

1.5 During a Conversation
Operations 1-41
Basic Operations
Placing a Call in System Parking Area (Call Park)
Allows you to place a held call into a system parking area. You can release from the parked
call to perform other operations. The parked call can be retrieved by any extension user.
Up to 10 calls can be parked.
PT and SLT
For a PT: Press HOLD.
For an SLT: Flash the hookswitch. Dial 22.
2 2
Confirmation tone
and dial tone Confirmation tone
and dial tone Enter a parking zone number
(0 through 9).
parking zone no.
During a conversation
HOLD
For an SLT
For a PT
• If you hear a busy tone, it indicates the specified parking zone is
unavailable.
• You do not need to redial the feature number to change the parking
zone. Just enter the parking zone number while hearing the busy tone.
PT and SLT
Confirmation tone
and dial tone Dial 52. Enter a parking zone number
(0 through 9) where the call
is parked.
5 2 parking zone no.
Lift the handset or press
SP-PHONE/MONITOR.
You can talk
to the party.
• If there is no held call, you will hear a reorder tone.
Retrieving a parked call
• If a parked call is not retrieved within a pre-determined time (default: 30 seconds), ringing
will be heard (Hold Recall).
• If a parked call is not retrieved within 30 minutes, it will be automatically disconnected.
• This feature is useful when you want to hold more than one intercom call with a PT, or
more than one intercom or outside call with an SLT.
• During a 5-party conference, you cannot use this feature.
• 1.7 Useful Features, “Conference (5-party)”
• See the Installation Manual, Section 3, “Call Park”.
PT
! !
☞