Panasonic KX-TA308 - Manual (Page 47)

1.5 During a Conversation
Operations 1-39
Basic Operations
• During a 5-party conference, you cannot use this feature.
• With outside calls, you can put multiple calls on hold. However, with intercom calls, you
can put only one call on hold.
• If a call is placed on hold for more than the programmed time, ringing or an alarm tone will
be heard (Hold Alarm/Hold Recall) and the LCD will flash the following display.
Example:
— When holding extension 111, Mr. Brown: “111: Brown” will flash.
— When holding outside (CO) line, CO 1: “Call on CO 1” will flash.
• If “Hold-2” or “Hold-3” is assigned by System Programming, you must dial “20” after
flashing the hookswitch.
• Only an outside or intercom call can be placed on hold at one time. If you want to hold both
calls, use the Call Park feature.
• 1.5 During a Conversation, “Retrieving a Call on Hold (Call Hold Retrieve)”
• 1.5 During a Conversation, “Placing a Call in System Parking Area (Call Park)”
• 1.7 Useful Features, “Conference (5-party)”
• See the Installation Manual, Section 3, “Hold”.
SLT
SLT
PT
PT
PT
☞
Prevents other extension users from retrieving your held call. Only the user who held the
call can retrieve it.
Placing a call on exclusive hold
PT
Press HOLD.
HOLD
Press HOLD again.
HOLD
During a conversation
• The CO or INTERCOM indicator light flashes green slowly.
• The current call is placed on hold.
• The CO or INTERCOM indicator light flashes green
moderately.
• The current call is placed on exclusive hold.
Placing a Call on Hold Exclusively (Exclusive Hold)
PT
Press the CO or INTERCOM
which is on exclusive hold.
CO
or
INTERCOM
Retrieving a call on exclusive hold
• The CO or INTERCOM indicator light turns steady green.
• The held call is released.