Panasonic KX-TA308 - Manual (Page 48)

1.5 During a Conversation
1-40 Operations
Retrieving a Call on Hold (Call Hold Retrieve)
• “Call Park” and “Exclusive Hold” cannot be retrieved by this feature.
• You can hear a confirmation tone when the call is retrieved by entering the feature number.
• 1.5 During a Conversation, “Placing a Call on Hold (Call Hold)”
• See the Installation Manual, Section 3, “Hold”.
Allows you to retrieve a call that has been placed on hold by another extension.
Retrieving an outside call on hold
PT and SLT PT
Enter the held outside
(CO) line number
(1 through 6).
CO
Dial 53.
outside (CO) line no. 5 3
Lift the handset or
press
SP-PHONE/MONITOR. Press the CO whose indicator
is flashing red slowly. Confirmation
tone
At the other extension At the other extension
• The CO indicator light
turns steady green.
Retrieving an intercom call on hold
PT and SLT
Enter the holding extension
number (100 through 199). Dial 5.
extension no. 5
Lift the handset or press
SP-PHONE/MONITOR. Confirmation tone
At the other extension
! !
☞
• During a 5-party conference, you cannot use this feature.
• If a held call is not retrieved within a pre-determined time (default: 30 sec.), ringing will be
heard (Hold Recall).
• If an outside call is placed on hold and not retrieved within 30 minutes, it will be
automatically disconnected.
• With outside calls, you can put multiple calls on exclusive hold. However, with intercom
calls, you can put only one call on exclusive hold.
• 1.5 During a Conversation, “Placing a Call on Hold (Call Hold)”
• 1.7 Useful Features, “Conference (5-party)”
• See the Installation Manual, Section 3, “Hold”.
PT
PT
PT
PT ! !
☞