Panasonic KX-TA308 - Manual (Page 74)

1.7 Useful Features
1-66 Operations
• If you have more than one message at your extension,
the line connects you to the selected message sender.
• The message is cleared after
the conversation.
Calling back the message notification sender
Clearing all message notifications by the message receiver
PT
Press MESSAGE.
MESSAGE
Lift the handset or press
SP-PHONE/MONITOR. Talk.
• All messages are cleared.
PT
Dial 700. Dial #.
7 0 0
Lift the handset or press
SP-PHONE/MONITOR. Hang up or press
SP-PHONE/MONITOR.
#
• Each extension can have a maximum of 8 simultaneous messages. If you try to set the ninth
message, you will hear a reorder tone.
• If the MESSAGE indicator does not go out after calling the extension which left the
message, another message is waiting.
• If multiple message notifications are left at your extension, call back is executed in the order
received.
• If you select a specific message to call back, the other call backs will be executed in the
order received, starting with the one selected.
(e.g.) 5
→ 6 → 7 → 8 → 1 → 2 → 3 → 4
• 1.2 Proprietary Telephone Settings, “Customizing the Buttons on Your Telephone”,
Restoring the MESSAGE Button
• See the Installation Manual, Section 3, “Message Waiting”.
PT
PT
PT
PT ! !
☞
Checking and Selecting a message notification by the message receiver
If there is a message, the message waiting lamp (MESSAGE indicator) light will be on.
PT
Press MESSAGE repeatedly
until the desired message appears.
MESSAGE
When the telephone is idle and on-hook
• The stored messages are shown on the
display in the order they were received.