Panasonic WV-CU360C - Manual (Page 39)

40
MAJOR OPERATING CONTROLS & THEIR FUNCTIONS
■ Front View (Template for WJ-FS616C)
System Controller
OPERATE LOCK ALARM
SPOT
AUTO/+
IRIS
CLOSE OPEN
NEAR FAR
TELE WIDE
FOCUS
ZOOM
IRIS RESET
VTR
CAM
MULTI
SCREEN
SEQUENCE
EL-ZOOM MULTI SELECT
STILL PRE-POSI
ALT
ALM RESET
ALM SUSPEND
FUNCTION
ALL RESET
CAMERA SET
ON OFF ON/OFF
SETUP
AUTO
FOCUS
HOME/-
UNIT CAM
ESC SET
UP
L R
DOWN
UNIT CAMERA
For Multiplexer
WV-CU C
360
T/L MODE
CAMERA SITE CONTROL
AUX 2
AUX 1
!5!6!7
!8!9@0
@1@2@3
@4@5@6
@7@8
q w e r t
y u i o !0 !1 !2 !3 !4
q Operate Indicator (OPERATE)
Is lit while power is supplied to the System Controller.
w Lock Indicator (LOCK)
Is lit while operation of the System Controller and WJ-
FS616C is prohibited by the connected computer. The
lock can be released by sending a command from the
computer.
e Alarm Indicator (ALARM)
Blinks when an alarm is activated. Blinking changes to
steady light when the alarm is automatically reset.
To turn the indicator off, press the
ALM RESET button.
r LED Display (UNIT CAMERA)
LED display allowing you to confirm the number of the
system unit and camera in operation. The CAMERA
section will display “–” when operating in multiscreen or
sequence mode.
t Iris buttons (IRIS, CLOSE/OPEN)
Close or open the lens iris of cameras equipped with
the specified lens.
When these buttons are pressed at the same time, the
lens iris is reset to the factory setting.
y Joystick Controller (UP/DOWN/L/R)
Used to operate the pan/tilt head manually, or to move
the cursor to the desired position in the setup menu of
the Video Multiplexer.
UP: Upward
DOWN: Downward
L: Left
R: Right
u Focus buttons (FOCUS, NEAR/FAR)
Adjust the lens focus of cameras equipped with the
specified lens.
i Zoom buttons (ZOOM, TELE/WIDE)
Zoom cameras equipped with the specified lens.
o Auto/Increment button (AUTO/+)
Activates the auto panning function.
During the setup, this button is used to select the
desired parameter in the setup menu.