Pan/tilt control (auto/random panning), Camera housing control, Wiper control – Panasonic WV-CU360C User Manual
Page 61: Defroster control, Auxiliary control
63
■
Pan/Tilt Control (Auto/Random
Panning)
1. Select the desired monitor and camera.
2. Type
1
using the numeric button, then press the
PAN
button to toggle the Auto Panning function on the
selected camera On and Off.
3. Type
2
using the numeric button, then press the
PAN
button to toggle the Random Panning function on the
selected camera On and Off.
Note:
Moving the Joystick Control will stop Auto or
Random panning.
■
Camera Housing Control
●
Wiper control
1. Select the desired monitor and camera.
2. Type
3
using the numeric button, then press the
AUX
button to toggle the power of the Wiper on the selected
camera On and Off.
Note:
To prevent premature wearing of the wiper
blades, be sure to turn off the wiper when it is not
needed or before selecting another camera for
viewing.
MON
CAM
ESC
SET
PAN
1
2
3
4
5
6
7
8
0
9
MON
CAM
ESC
SET
AUX
1
2
3
4
5
6
7
8
0
9
●
Defroster Control
1. Select the desired monitor and camera.
2. Type
4
using the numeric button, then press the
AUX
button to toggle the power of the Defroster on the
selected camera On and Off.
●
Auxiliary Control
The following function is available only when the WV-RC100
or WV-RC150 Receiver is included in the system.
1. Select the desired monitor and camera.
2. Type
1
using the numeric button, then press the
AUX
button to toggle the user Auxiliary Switch 1 of the
Receiver On and Off.
3. Type
2
using the numeric button, then press the
AUX
button to toggle the user Auxiliary Switch 2 of the
Receiver On and Off.
MON
CAM
ESC
SET
AUX
1
2
3
4
5
6
7
8
0
9
MON
CAM
ESC
SET
AUX
1
2
3
4
5
6
7
8
0
9