Setup procedures, Administrator authorization, Baud rate – Panasonic WV-CU360C User Manual

Page 59: Parity

Advertising
background image

61

Setup Procedures

Set up the baud rate and parity check mode for the controller while observing the LED on the front panel.

Administrator Authorization

1. Press the

CAM/SET

button while [SEtUP] is displayed.

The [- - - - -] prompt appears.

2. Enter a password using the numeric buttons, then press

the

CAM/SET

button.

The default setting is [12345].

3. If the password entered is valid, [SPEED] appears. If

password entry failed, the menu returns to [SEtUP].

Baud Rate

When bit 7 of the MODE switch is in the ON position, you
need to select the communication speed manually to match
that of the WJ-SX350.

1. Display [SPEED], and press the

CAM/SET

button twice.

2. Select a parameter entering a bracket-enclosed num-

ber, e.g., (3), or moving the joystick.
The default setting is 9 600 bps.

(1) 2 400:

2 400 bps

(2) 4 800:

4 800 bps

(3) 9 600:

9 600 bps *

(4) 19 200:

19 200 bps

Note:

Selecting a slower rate (e.g., 2 400 bps) will

delay the response time (e.g., the time until an acti-
vated alarm is reset).

3. Press the

CAM/SET

button to validate the selection.

4. Press the

MON/ESC

button to return to the [SPEED]

menu.

Parity

The parity check mode is selected in this menu.

1. Display [PrtY] and press the

CAM/SET

button twice.

2. Select a parameter with the joystick.

The default setting is None.

n:

None

E:

Even parity

3. Press the

CAM/SET

button to confirm the selection.

4. Press the

MON/ESC

button to return to the [SPEED]

menu.

Note:

The baud rate and parity check mode of the WJ-

SX350 and the controller must be the same, otherwise
data communications will not function.

Menu
Selection

Move Joystick
UP and down
to select

Setup Menus

Parameter Selection (default*)

LED Display

blinking

Setup

Administrator

Password

Prompt

Speed

Parity

Initial

Display

Authorization

Baud Rate

(bps)

Press

twice

Parity Check

CAM

SET

CAM

SET

MON

ESC

LED prompts you to enter pass-
word

Enter a 5-digit password,
press (12345*)

(1) 2 400 (2) 4 800 (3) 9 600*
(4) 19 200

(1) None* (2) Even

Reading

Function

OK

No

DOWN

L

R

UP

L

R

CAM

SET

Advertising