Panasonic CPC-EX User Manual

Page 174

Advertising
background image

Appendix A. EX 1.0 Feature Update

Section 300-Installation

Page A-14

DBS Manual - Revised April 2000

DBS-2.3/9.2-300

has been received, pressing the MSG key will perform auto-callback in
the order received.

Auto-Answer Voice Message. You can press the MSG key to

automatically access your voice mailbox. The phone will dial your
voice mailbox and send access codes (if programmed) for retrieving
messages.

Operation

To Program Voice Mailbox Access Codes into the MSG Key:

Press PROG MSG [16-digit number] HOLD

The display will reflect “Regist Data”.

To Confirm a Voice Mailbox Access Code Programmed into the
Message Key..

Press CONF MSG.

The programmed access code will be displayed.

Notes

Operation With Message Waiting Indicator. The Message Waiting
Indicator on the phone’s upper right corner will flash whenever a callback
message or voice message has been received.

Operation During Call States. The MSG key will work only when the
phone is idle, receiving dial tone, or in Directory Mode (via select key).

Operation If Phone Has Both a Callback Message from another
Extension and a Voice Message.
Messages are accessed in a First In, First
Out order. If the callback message was received before the voice message,
then pressing the MSG key will activate Auto-Callback first. Likewise, if
the voice message was received before the callback message, pressing the
MSG key will access your Voice Mailbox.

Interaction with Tone-Calling Mode. If an Auto-Callback is placed to a
phone that is in tone-calling mode (i.e., not voice-calling), that phone must
answer or the message canceled before another message can be accessed.

FF-Key Restriction. These MSG features cannot be assigned to an FF-
key.

Reprogramming the MSG key if Extension Number Digits is changed. If
the DBS is reprogrammed to use a different extension numbering plan (i.e.,
changed from 2-digit to 3-digit extensions, 3-digit to 4-digit extensions,

Advertising