Panasonic CPC-EX - Manual (Page 99)

Section 300-Installation Chapter 5. Peripheral Equipment
DBS-2.3/9.2-300 DBS Manual - Revised April 2000 5-5
Figure 5-2. SMDR Format for CPC-AII and CPC-B Version 3.1 or higher
1 2 3 4 5 6 7
012345678901234567890123456789012345678901234567890123456789012345678901234567
1 2 3 4 5 6 7 8 9
T MM/DD HH:MM:SS HH:MM.SS NNN DDDDDDDDDDDDDDDDDDDDDDDDDDDD AAAAAAAAAA VVVVV NN
1=Call type
S=Inbound DISA
s=Outbound DISA
I=Incoming
O=Outgoing
T=Transfer (See Note 1.)
N=DNIS
D=DID
2=Date
MM=month
DD=day
3=Call start time
HH=hours
MM=minutes
SS=seconds
4=Call duration
HH=hours
MM=minutes
SS=seconds
5=Extension number
10-69, 100-699=extensions
CO number=DISA
6=Dialed digits or Caller ID
DD=digits 0-9 or symbols * or #
(See Note 2.)
7=Account code
A=0-9999999999
8=Verified account code or walking
COS code
V0000-V9999=verified account codes
W0000-W9999=walking COS codes
9=Trunk Number
NN=number (01-64)
Notes:
1. Transferred calls include direct and group call pickups and conference calls.
If a station call is transferred to an outside number, an SMDR record is
also created for the station that is transferred.
2. The * symbol appears as a greater-than sign (>) on the SMDR printout; the # symbol
appears as a less-than sign (<). Centrex and PBX codes, as well as LCR access codes, do
not appear as dialed digits. If the Caller ID Feature is installed and enabled,
“Private” appears with calls that have restricted Caller ID display and “Out of Area”
with long distance calls that do not provide Caller ID information.