Polycom 1725-31402-001 - Manual (Page 113)

Release Notes - UC Software Changes
Copyright © 2011 Polycom, Inc. Page 105
sip added softkey.feature.mystatus If set to 0, the MyStatus soft key is
not displayed.
If set to 1 or Null, the MyStatus soft
key is displayed.
sip added softkey.feature.buddies If set to 0, the Buddies soft key is not
displayed.
If set to 1 or Null, the Buddies soft key
is displayed.
sip added softkey.feature.basicCallManagement.redu
ndant If set to 0 and the phone has hard
keys mapped for Hold, Transfer, and
Conference functions (all must be
mapped), all of these soft keys are
not displayed.
If set to 1 or Null, all of these soft
keys are displayed.
phone1 added reg.x.strictLineSeize If set to 1, forces phone to wait for
200 OK on registration x when
receiving a TRYING notify.
If set to 0 or Null, this is old behavior.
If this parameter is Null,
voIpProt.SIP.strictLineSeize is
checked.
If both parameters are set, this
parameter takes precedence.
phone1 added reg.x.musicOnHold.uri A URI that provides the media stream
to play for the remote party on hold.
When present, and if
reg.x.musicOnHold is not Null, this
attribute overrides the global Music
on Hold defined in the sip.cfg
configuration file.
phone1 added attendant.ringType The ring tone to play when a BLF
dialog is in the offering state.
Permitted values are 1 to 22. The
default is Null.
2.26 Version 3.0.4
Note that Version 3.0.4 was released after SIP 3.1.0, so it should not be assumed that the
changes in SIP 3.0.4 also apply to SIP 3.1.0.
2.26.1 Added or Changed Features

44546:
Set Handset AEC and AES to „on‟ in default configuration files to avoid
handset echo issues.

45411: Adjust Speaker phone (Hands Free) volume control for better user
experience.
2.26.2 Removed Features
None.
2.26.3 Corrections

43264: Phone is not able to answer calls due to duplicate INVITEs with same
details and new BRANCH ID