Polycom 1725-31402-001 - Manual (Page 81)

Release Notes - UC Software Changes
Copyright © 2011 Polycom, Inc. Page 73
sip added voIpProt.SDP.early.answerOrOffer
If set to 1, an SDP offer or
answer is
generated in a provisional
reliable response
and PRACK request and
response.
If set to 0, an SDP offer or
answer is not
generated.
sip added
voIpProt.SDP.offer.iLBC.13_33kbps
.includeMode See Administrator‟s Guide
for SIP 3.2.0 for details
sip changed voIpProt.server.1.port 5060
port of a SIP
server that accepts
registration
sip added voIpProt.server.2.address
sip added voIpProt.server.2.expires Minimum now 10
sip added voIpProt.server.2.expires.lineSeize 30
sip added voIpProt.server.2.expires.overlap
sip added voIpProt.server.2.lcs
sip added voIpProt.server.2.port
sip added voIpProt.server.2.register 1
sip added voIpProt.server.2.retryMaxCount 0
sip added voIpProt.server.2.retryTimeOut 0
sip added
voIpProt.SIP.compliance.RFC3261.
validate.contentLength
If set to 1, validation of the
SIP header
content language is
enabled.
sip added
voIpProt.SIP.compliance.RFC3261.
validate.uriScheme
If set to 1 or Null,
validation of the SIP
header
URI scheme is enabled.
sip added voIpProt.SIP.strictReplacesHeader
This parameter applies
only to directed call
pick-up attempts initiated
against monitored
BLF resources.
sip added voIpProt.SIP.use486forReject
If set to1 and the phone is
indicating a ringing
inbound call appearance,
phone will transmit
a 486 response to the
received INVITE when
the Reject soft key is
pressed.
phone1 added
attendant.behaviors.display.remote
CallerID.automata
1
Flags to determine
whether or
not remote party caller ID
information is presented to
the
attendant.
phone1 added
attendant.behaviors.display.remote
CallerID.normal
1
phone1 added
attendant.behaviors.display.spontan
eousCallAppearances.automata
0
Flags to determine
whether or