Polycom 1725-31402-001 - Manual (Page 127)

Release Notes - UC Software Changes
Copyright © 2011 Polycom, Inc. Page 119
2.33.4 Configuration File Parameter Changes
.cfg File Action Parameter Description
sip added voIpProt.SDP.
useLegacyPayloadTypeNegotiation
sip added voIpProt.SIP.csta Enables uaCSTA.
sip added up.handsfreeMode Enables or disables hands-free
speakerphone.
phone1 added up.analogHeadsetOption Selects optional external hardware for
use with a headset attached to the
phone's analog headset jack.
sip changed tone.chord.callProg.6.offDur Changed from 0 to 10000.
sip changed tone.chord.callProg.6.repeat Changed from 1 to 2.
sip changed se.pat.ringer.12.name="Ringback-style" Added 100ms of silence to start of
pattern.
sip removed voice.gain.rx.analog.handset.wideband
voice.gain.rx.analog.handset.sidetone.
wideband
voice.gain.tx.analog.handset.wideband
voice.handset.wideband
voice.handset.wideband.rxdg.adjust
Controlled gain for wideband handset.
This control is now performed through
the parameters that do not include
“.wideband”.
sip added voice.qualityMonitoring The voice.qualityMonitoring section
controls the Voice Quality Monitoring
feature.
sip added tcpIpApp.keepalive.tcp.idleTransmitInterval
tcpIpApp.keepalive.tcp.
noResponseTrasmitInterval
tcpIpApp.keepalive.tcp.sip.tls.enable Controls TCP keep-alive on SIP TLS
connections.
sip added call.singleKeyPressConference
call.localConferenceCallHold Enables new conference behaviors.
sip added call.disableAutoResumeCentralConference For use with uaCSTA feature for
centralized confrerencing.
sip added bg.hiRes.gray.pat.solid.x.name
bg.hiRes.gray.pat.solid.x.red
bg.hiRes.gray.pat.solid.x.green
bg.hiRes.gray.pat.solid.x.blue
bg.hiRes.gray.bm.x.name Sets up color (gray-scale) and
graphical backgrounds for IP 550,
IP560 and IP 650 phones.
sip added feature.x.name Added new features “nway-
conference”, “call-recording” and
“corporate-directory”
phone1 added reg.x.bargeInEnabled Enables barge in feature for SCAs.
sip added dir.corp The dir.corp section controls the
Corporate Directory feature.
sip added usb.set1.device.1.vendor
usb.set1.device.1.product Identifies supported USB devices.
This list should be populated only with
devices that are known to work with
the phones. See Technical Bulletin
38084 for details.
Table 2-2
2.34 Version 2.2.2
2.34.1 Added or Changed Features

35534: De-couple Presence Signaling from Idle Screen Soft-key UI

36931: Add support for SoundPoint IP 560 product.