Polycom 1725-31402-001 - Manual (Page 117)

Release Notes - UC Software Changes
Copyright © 2011 Polycom, Inc. Page 109
2.28.4 Configuration File Parameter Changes
.cfg File Action Parameter Description
sip added voIpProt.SIP.strictUserValidation If set to “1”, forces phone to match
user portion of signaling exactly. If set
to “0”, phone will use first registration
if the user part does not match any
registration
sip added voIpProt.SIP.strictLineSeize If set to “1”, forces phone to wait for
200 OK when receiving a TRYING
notify.
sip added voIPProt.SIP.lineSeize.retries Controls the number of times the
phone will retry a notify when
attempting to seize a line (BLA). Valid
values are 3 to 10. Note that in this
release, a value of 3 results in 10. A
value of 2 can be used to get 3
retries.
phone1 added reg.n.strictLineSeize If set to “1”, forces phone to wait for
200 OK on registration n when
receiving a TRYING notify.
If this parameter is Null,
voIpProt.SIP.strictLineSeize is checked.
This parameter takes precedence.
2.29 Version 3.0.2 C
2.29.1 Added or Changed Features
None.
2.29.2 Removed Features
None.
2.29.3 Corrections

42034: Phone freezes when booting from TFTP server in certain scenarios

42060: When an IP601 with Expansion Modules attached is configured with many
speed-dials with long names. Removing or adding a speed-dial during a period of
high activity (e.g. call in progress) may result in sluggish UI response or in
extreme cases re-boot.
2.29.4 Configuration File Parameter Changes
None.