Polycom 1725-31402-001 - Manual (Page 52)

Release Notes - UC Software Changes
Page 44 Copyright © 2011 Polycom, Inc.
2.7.3 Corrections

59308:
A retransmitted INVITE message causes a “400 Bad Response” reply.
This is in violation of RFC 3261 section 17.2.1.

65207: A consistent but slow memory leak occurs as a result of receiving
INVITE messages containing “replaces”.

65435/65725: SoundPoint IP/VVX 1500: [IEC 60268-1]: The default and
maximum values for the headset and headphone audio levels have been
adjusted to ensure compliance with the IEC 60268-1 TUV safety requirements.

65660: The BootBlock may become corrupted as a result of accessing
unprotected section of flash memory.
2.8 Version 3.2.3
2.8.1 Added or Changed Features

43099: Added support for SoundStation IP 5000 Conference Phone.

43297: Sound effects can now be played out of a destination based on user
configuration. Configuration parameters: se.destination= “chassis”,
“handset”,”headset” or “active”. Default is “chassis”.

45462: All SoundPoint and SoundStation phones now comply with “retry-
after
” instructions embedded in SIP Response codes 500 and 503 as part of
REGISTER and other requests.

50739: SoundStation IP 7000 – HDX Integration: On a multi-leg conference,
when the 'End Call' soft key or the 'On Hook' hard key is pressed, the
conference phone will ask the user if the entire call should terminated. A
negative response will guide the user to the conference
“manage” menu to
allow the user to terminate the individual legs of the call. The dialog only
appears for multi-leg conference calls.

51753: SoundPoint IP 450: Improved the appearance of anti-aliased characters.

51940: All SIP phones now have a “fail-over” feature that enables phones to
re-register before diverting SIP signaling to an alternate server.
NOTE: This feature will be formally released and documented in a future
release.

54041: Format of DHCP Option 60 Data is now configurable and added support
for Option 125 as per RFC 3925.

54983: VVX 1500: Internal IP address of phone (instead of an alias) is no longer
being sent in the Facility Message.