Polycom 1725-31402-001 - Manual (Page 91)

Release Notes - UC Software Changes
Copyright © 2011 Polycom, Inc. Page 83
2.18.4 Configuration File Parameter Changes
.cfg File Action Parameter Description
sip added voIpProt.SIP.serverFeatureControl.localPr
ocessing.dnd If set to 0 and
voIpProt.SIP.serverFeatureContr
ol.dnd ="1", the phone will not perform
local DND call behavior.
If set to 1 or Null, the phone will perform
local DND call behavior on all calls
received.
sip added voIpProt.SIP.serverFeatureControl.localPr
ocessing.cf If set to 0 and
voIpProt.SIP.serverFeatureContr
ol.cf="1", the phone will not perform
local Call Forward behavior.
If set to 1 or Null, the phone will perform
local Call Forward behavior on all calls
received.
sip added voIpProt.SIP.tcpFastFailover If set to 1, failover occurs based on the
values of
reg.x.server.y.retryMaxCount
voIpProt.server.x.retryTimeOut.
If set to 0, use old behavior.
If reg.x.tcpFastFailover is Null,
this attribute is checked
.
If voIpProt.SIP.tcpFastFailover
is Null, then this feature is disabled.
If both attributes are set, the value of
reg.x.tcpFastFailover takes
precedence.
sip changed voice.gain.tx.digital.headset.IP_430 Changed from 10 to 6
sip changed voice.headset.txag.adjust.IP_430 Changed from 39 to 21
sip changed dir.corp.pageSize Changed from 16 to 32
sip changed dir.corp.cacheSize Changed from 64 to 128
sip added dir.corp.leg.pageSize pageSize applied to LDAP queries on
SoundPoint IP 301, 501, 600 and 601
phones. Range is 8 to 64. Default
value is 8
sip added dir.corp.leg.cacheSize cacheSize applied to LDAP queries
on SoundPoint IP 301, 501, 600 and
601 phones. Range is 32 to 256
Default value is 32.
sip added dir.corp.sortControl Controls how client makes queries
and does it sort entries locally. It
should not be used by customers.
If set to 0 or Null, leave sorting as
negotiated between client and
server.
If set to 1, force "non-sorting"
Queries (Not recommended due to
possible performance issues)
sip added dir.corp.autoquerySubmitTimeout To control if there is a timeout after
the user stops entering characters
in the quick search and, if there is,
how long the timeout is.
If set to 0, there is not (disabled).
sip added dir.corp.vlv.allow A flag to determine whether or not
VLV queries can be made if the
LDAP server supports VLV.
If set to 0, VLV queries are disabled.
If set to 1 or Null, VLV queries are
enabled.