Polycom 1725-31402-001 - Manual (Page 77)

Release Notes - UC Software Changes
Copyright © 2011 Polycom, Inc. Page 69

51631: Phone not releasing first assigned IP address when VLAN is set via
DHCP.

51633: Phone fails to play busy/reorder tone upon a refer based transfer when
it gets a 603 or 486 response

51644: Some Japanese strings do not display correctly.

51690: EFK feature is used for onetouch Voicemail dialing. When using on
3.1.3 the phone appears not to honor the stickyautolinesieze

51718: Phone continues to ring after the call has been answered with a certain
call signaling sequence.

51763: SoundStation IP 7000/HDX Integration: When Adding video to an
existing call. IP7000 shows as on Mute but Far end can hear them.

51838:Some Japanese characters are not properly displayed.

52014/53597: In SIP 3.x.x when an IP phone picks up a transferred call in a
certain scenario, the call is immediately placed on Hold instead of being
connected.

52017: Web interface issue Password entry is not masked when entered (since
SIP 3.0.0)

52108: Phone fails to restore destination to Asserted Identity or Remote ID
after a transfer fails
2.12.4 Configuration File Parameter Changes
This section lists the parameters that have been added/changed or deleted from the
template phone1.cfg and sip.cfg files. For further description of parameters please refer to
the Administrator‟s Guide for the SIP 3.2 Release.
Note also that the template 000000000000.cfg file has been modified in order to facilitate
support for the Legacy phones and the VVX 1500 in this release.
File Change Attribute
Old
value
New value Description
sip added call.directedCallPickupMethod
“native” or
“legacy” See Administrator‟s Guide
for SIP 3.2.0 for details
sip added call.parkedCallRetrieveMethod
“native” or
“legacy” See Administrator‟s Guide
for SIP 3.2.0 for details
sip added call.parkedCallRetrieveString Star code
See Administrator‟s Guide
for SIP 3.2.0 for details
sip added dialplan.applyToRemoteDialing
0 or 1;
Default is 0
A flag to determine if the
dial plan applies to
for calls made through the
Polycom HDX
system.
sip added dialplan.applyToTelUriDial
0 or 1
Default is 1
A flag to determine if the
dial plan applies to
uses of the tel:// URI.
sip added ind.class.2.state.35.index 44
Changes Relating to
screen layout
sip added ind.class.2.state.36.index 42
sip added ind.class.2.state.37.index 43