Polycom 1725-31402-001 User Manual

Page 45

Advertising
background image

Release Notes - UC Software

Changes

Copyright © 2011 Polycom, Inc.

Page 37

58509

: Within the „Re-registration on failover‟ feature, the phone sends an

extra

„Register‟ request to primary server after the first fail-over.

58520: VVX 1500: Uni-directional Video Streaming interoperation issue with

Siemens Video Desktop Client ODC.

58574: SoundPoint IP 650: Re-registration on failover: Phone does not

invalidate an existing registration when it is registered with a Broadsoft
server.

58619: Line Authentication: line becomes unregistered when an invalid name

and password is entered from the menu options on the phone. The line
becomes unregistered until the phone is rebooted.

58782: The phone will set the Call Control 802.1Q Priority incorrectly when

using TCP. The value is set correctly when using UDP.

58785: VVX 1500: Phone does not append the MAC address to HTTP user

agent headers when configured to do so. Introduced in SIP 3.2.2.

58787: VVX 1500: Phone reboots immediately after making a call to an RMX

when the Camera Target Frame Rate is set to minimum.

58874: When using TCP preferred transport, the phone will not resend a 200

OK message after answering a call without receiving an ACK.

58906: Phone does not clear its BLA state table when receiving a NOTIFY

message with state = full after a SUBSCRIBE message.

58907: VVX 1500: The phone fails to send an INVITE SIP packet when the

configuration parameter msg.mwi.1.callBack="voicemail" and user presses
the „Messages‟ key.

58908: VVX 1500: With BootROM 4.2.1.0334, the phone sends a truncated

Option 60 message.

58913: The phone reboots when pressing the Messages key

while “Message

Waiting Indicator” is disabled. When the phone has more than one registration
and

„msg.mwi.1.callBackMode=”disabled” and

„msg.mwi.2.callBackMode=”disabled”‟, the phone will freeze when the
“Messages” key is pressed. The phone will no longer respond to any further
key presses.

59129:

The “Centralized Conference” feature fails when a URI is incorrectly

assigned to voIpProt.SIP.conference.address.

59262: A conference notification will cause the phone to lock-up and then

reboot. This is as a result of invoking the “BargeIn” feature on a specific
Asterisk implementation

59308: A retransmitted INVITE message results in a

“400” response. This is in

violation of RFC 3261 section 17.2.1.

59430: VVX 1500: Call received from a mobile will cause the phone to display:

“SIP+86…@”. The „@‟ should not be displayed.

Advertising