NetComm NB6 User Manual
Page 126
NB6, NB6W, NB6Plus4W
User Guide
YML854Rev1
16
www.netcomm.com.au
SNMP Agent:
Choose
Disable to close this function; choose Enabled to open this function.
Read Community:
SNMP community for reading access only. The default setting is
public. Please key in the data that
your ISP provided.
Write Community:
SNMP community for reading and writing access. The default setting is
private. Please key in the
data that your ISP provided.
enable Trap Service:
Configure the SNMP service to send a trap when it receives a request for information that does not
contain the correct community name and does not match an accepted host name for the service.
Check this box to enable this function, otherwise uncheck it.
TRAP Manager IP:
Type an IP address as the remote workstation. If any abnormal condition happens, you can advice
remote workstation through SNMP agent.