NetComm NB6 - Manual (Page 8)

NB6, NB6W, NB6Plus4W User Guide YML854Rev1
8 www.netcomm.com.au
features
ADSL Compliance
• ANSI T1.413 Issue 2
• ITU G.992.1 Annex A (G.dmt)
• ITU G.992.2 Annex A (G.lite)
• ITU G.994.1 (G.hs)
• Support dying gasp
• Maximum Rate: 8 Mbps for downstream and 1 Mbps for upstream
ADSL2 Compliance
• ITU G.992.3 Annex A (G.dmt.bis)
• Maximum Rate: 12 Mbps for downstream and 1 Mbps for upstream
ADSL2+ Compliance
• ITU G.992.5 Annex A (G.dmt)
• Maximum Rate: 24 Mbps for downstream and 1.2 Mbps for upstream
Wireless LAN Compliance (NB6W and NB6Plus4W only)
• IEEE 802.11g and IEEE 802.11b
• Data Rate: 54, 48, 36, 24, 18, 12, 9, 6 Mbps for 802.11g; 11, 5.5, 2, 1 Mbps for 802.11b
• Modulation Technique: OFDM for 802.11g; CCK (11 Mbps, 5.5 Mbps) for 802.11b; DQPSK (2Mbps) for
802.11b; DBPSK (1 Mbps) for 802.11b
• Network Architecture: infrastructure
• Operating Frequency: 2.4 ~ 2.5 GHz
• Operating Channels: depending on local regulations. For example, 11Channels (Northern America), 13
Channels (Europe), and 14 Channels (Japan)
• RF Output Power: 13.5+/-1.5dBm for 802.11g; 17.5+/-1.5dBm for 802.11b
• Antenna Connectors: Hardware diversity support. One external antenna and one internal antenna are provided
(both are fixed and cannot be changed).
• Coverage Area: 300 meters
• Support WEP (Wired Equivalent Privacy) mechanism which uses RC4 with 64-bit or 128-bit key length
• Support 802.1x and WPA/WPA2
• Support the Access Control function: only registered WLAN clients are allowed to associate to this device.
• SSID can be hidden for the security issue (Don’t broadcast SSID).
• Support the Repeater function to extend the coverage area
• Support wireless user isolation for the hotspot