NetComm NB6 - Manual (Page 79)

YML854 Rev1 NB6, NB6W, NB6Plus4W NB6, NB6W, NB6Plus4W User Guide
www.netcomm.com.au 
IP Routing – Dynamic Routing (NB6Plus4W only)
Routing Information Protocol (RIP) is utilized by means of exchanging routing information between routers. It
helps the routers to determine optimal routes. This page allows you to enable/disable this function.
RIP version:
It incorporates the RIP information when receiving and broadcasting the RIP packets. From the drop
down menu, select a RIP version to be accepted,
1, 2 or both.
Operation:
There are two modes for you to choose, Active and Passive. Select Active for transmitting and
receiving data, or select Passive for receiving data only.
enabled:
Check Enabled to enable the RIP function on different interface. Otherwise, disable this function.
Click Apply to invoke the settings set here.