NetComm NB6 User Manual
Page 54
NB6, NB6W, NB6Plus4W
User Guide
YML854Rev1
54
www.netcomm.com.au
DhCP Server On:
Check this item if DHCP service is needed on the LAN side. The router will assign IP address and
gateway address for each of your PCs.
Start IP Address & end IP Address:
Enter the information needed.
Lease Time:
Key in the duration for the time. The default is 1day.
DhCP Server Off:
Check this item if DHCP service is not needed on the LAN.
Key in all the necessary settings. Click
Next for the coming page.
You can check the settings on the
Summary page.
If you find anything incorrect, click
Back to modify the settings.
If everything is OK, click
Finish to accept these settings.
And the following page will appear.
Now, the system will reboot to activate the new settings that you have set in this section.
Please wait for 2 minutes before restarting the router.