Enabling wpa-psk authentication and security – NetComm NB6 User Manual
Page 147
Advertising
YML854 Rev1
NB6, NB6W, NB6Plus4W
NB6, NB6W, NB6Plus4W
User Guide
www.netcomm.com.au
14
enabling WPA-PSK Authentication and Security
1.
Click the
Start button, select Control Panel, then Network Connections.
2.
Right click on your wireless network card and select
Properties. Click on the Wireless Networks tab.
3.
Click
Add to continue.
4.
Select the
Association Tab, and enter the SSID of the AP. (e.g., Please)
Advertising