NetComm NB6 - Manual (Page 47)

YML854 Rev1 NB6, NB6W, NB6Plus4W NB6, NB6W, NB6Plus4W User Guide
www.netcomm.com.au 4
quick Setup
The quick setup wizard will guide you to configure the ADSL router through some specific steps. Yet different
connection interface will lead to different setting pages. Refer to the following pages for detailed information.
Auto Scan Internet Connection (PvC):
If there is no any PVC configured in your ADSL router, you can check this item. Otherwise, please
uncheck this box.
vPI (virtual Path Identifier):
Identifies the virtual path between endpoints in an ATM network. The valid range is from 0 to 255. To
enter the setting, please refer to the setting that the ISP offered.
vCI (virtual Channel Identifier):
Identifies the virtual channel endpoints in an ATM network. The valid range is from 32 to 65535 (1 to 31 is
reserved for well-known protocols). To enter the setting, please refer to the setting that the ISP gave you.
After entering the VPI/VCI value, please click Next for the following step.