NetComm NB6 User Manual
Page 146
NB6, NB6W, NB6Plus4W
User Guide
YML854Rev1
146
www.netcomm.com.au
10.
Choose
Use a certificate on this computer option and select Use simple certificate selection
(Recommended).
11.
Check the
Validate server certificate check box if server certificate validation is required
12.
In the
Trusted Root Certification Authorities field, check the check box beside the name of the certificate
authority from which the server certificate was downloaded. (e.g., NetComm.savd.tw)
Note that if you leave all check boxes unchecked, you will be prompted to accept a connection to the root certification authority during
the authentication process.
13.
Click
OK three times to close the dialogs and save all the settings until return to Network Connections.
14.
Now the configuration for WPA authentication is completed. And you may start to use the wireless device.