NetComm NB6 - Manual (Page 91)

YML854 Rev1 NB6, NB6W, NB6Plus4W NB6, NB6W, NB6Plus4W User Guide
www.netcomm.com.au 1
Here provides an example shown in the right column. Select TCP as the Protocol type, and make the Source
and Destination IP address to include All, then type 0 and 65535 as the start and end port.
A new IP filtering setting for Outbound traffic is created in the web page. To edit the setting, please click to
get into the editing page. To delete the setting, click to erase it. To set another IP filtering, click Add again.
To add a new Inbound IP Filtering, click Inbound traffic in the item of Select the direction to filter packets on
the IP Filtering page. Use the same way to add a new one as stated above.