National Instruments PC-LPM-16/PnP - Manual (Page 11)

About This Manual
PC-LPM-16/PnP User Manual xii  National Instruments Corporation
installation and configuration instructions, specification
information about your DAQ hardware, and application hints.
• Software documentation—Examples of software documentation
you may have are the LabVIEW, LabWindows  /CVI
documentation sets, and the NI-DAQ documentation. After you set
up your hardware system, use either the application software
(LabVIEW or LabWindows/CVI) or the NI-DAQ documentation to
help you write your application. If you have a large, complicated
system, it is worthwhile to look through the software
documentation before you configure your hardware.
• Accessory installation guides or manuals—If you are using
accessory products, read the terminal block and cable assembly
installation guides. They explain how to physically connect the
relevant pieces of the system. Consult these guides when you are
making your connections.
• SCXI Chassis User Manual —If you are using SCXI, read this
manual for maintenance information on the chassis and for
installation instructions.
Related Documentation
The following document contains information that you may find helpful
as you read this manual:
• Your computer user or technical reference manual
Customer Communication
National Instruments wants to receive your comments on our products
and manuals. We are interested in the applications you develop with our
products, and we want to help if you have problems with them. To make
it easy for you to contact us, this manual contains comment and
configuration forms for you to complete. These forms are in
Appendix E,
Customer Communication , at the end of this manual.
a.Book : d.ATM Page xii Wednesday, November 20, 1996 6:36 PM