National Instruments PC-LPM-16/PnP - Manual (Page 81)

Appendix D Register-Level Programming
 National Instruments Corporation D-9 PC-LPM-16/PnP User Manual
Command Register 3
Command Register 3 contains other range setting configuration bits.
Address: 05 (hex)
Type: Write-only
Word Size: 8-bit
Bit Map:
Bit Name Description
7–2 0 Reserved Bits—These bits must be set to zero.
1–0 ARNG<1..0> Analog Input Voltage Range—These bits control the
analog input voltage range setting as follows:
The power-on value for ARNG<1..0> is 10.
7 6 5 4 3 2 1 0
0 0 0 0 0 0 ARNG<1> ARNG<0>
ARNG<1..0> Input Voltage Range
00 0 to 10 V
10
±
5 V, 0 to 5 V
11
±
2.5 V
a.Book : l.Appendix D Page 9 Wednesday, November 20, 1996 6:36 PM