National Instruments PC-LPM-16/PnP - Manual (Page 8)

 National Instruments Corporation ix PC-LPM-16/PnP User Manual
About
This
Manual
This manual describes the mechanical and electrical aspects of the
PC-LPM-16PnP and contains information concerning its installation,
operation, and programming. The PC-LPM-16PnP is a low-cost, low-
power analog input, digital, and timing I/O board for the IBM PC/XT,
PC AT, Personal System/2 Models 25 and 30, and laptop compatible
computers.
This manual also applies to the PC-LPM-16, a non-Plug and Play board.
The boards are identical in functionality, programming, and
performance, except for the differences listed in Appendix C,
Using
Your PC-LPM-16 (Non-PnP) Board .
Organization of This Manual
The PC-LPM-16/PnP User Manual is organized as follows:
• Chapter 1, Introduction , describes the PC-LPM-16/PnP, lists what
you need to get started, software programming choices, and
optional equipment, and explains how to unpack the
PC-LPM-16/PnP.
• Chapter 2 , Installation and Configuration , describes the
installation and configuration of the PC-LPM-16PnP.
• Chapter 3 , Theory of Operation , includes an overview of the
PC-LPM-16PnP board and explains the operation of each
functional unit making up the board. This chapter also explains the
basic operation of the PC-LPM-16PnP circuitry.
• Chapter 4 , Signal Connections , describes how to make input and
output signal connections to your PC-LPM-16PnP board via the
I/O connector.
• Appendix A , Specifications , lists the specifications of the
PC-LPM-16PnP.
• Appendix B , MSM82C53 Data Sheet , contains a manufacturer data
sheet for the MSM82C53 CMOS programmable interval timer
(OKI Semiconductor).
a.Book : d.ATM Page ix Wednesday, November 20, 1996 6:36 PM