Nortel Networks NN44200-300 - Manual (Page 45)

Preparing the modem 45
To set the modem DIP switches
Use a pair of tweezers or a small screwdriver to set the DIP switches as
described in the Change to column of the following table:
Note: ON is down. OFF is up.
DIP
switch Default
setting Change
to
Function
1 OFF OFF Data Terminal Ready (DTR) override
• OFF: Normal DTR operations. (The computer
must provide a DTR signal for the modem to
accept commands. If DTR is dropped, the call is
terminated.)
• ON: The modem ignores DTR (override).
2 OFF OFF Verbal/numeric result codes
• OFF: Verbal (word) results.
• ON: Numeric results.
3 ON ON Result code display
• OFF: Suppresses result codes.
• ON: Enables result codes.
Nortel CallPilot
1002rp Server Hardware Installation
NN44200-300 01.01 Standard
5.0 23 February 2007
Copyright © 2007, Nortel Networks Nortel Networks Confidential
.