National Instruments Isolated Analog Input Device NI PXI-4224 - Manual (Page 27)

Chapter 3 Configuring and Testing
© National Instruments Corporation 3-3 NI PXI-4224 User Manual
Verifying and Self-Testing an NI-DAQmx Task or Global Channel
After you have created an analog input voltage NI-DAQmx Task or
NI-DAQmx Global Channel, verify the NI-DAQmx Task or NI-DAQmx
Global Channel signal and functionality using the Test button in the
toolbar:
1. If you created an NI-DAQmx Task, set the timing and triggering
settings you wish to use in the test in the Task Timing and Task
Triggering tabs.
2. Click the Test button to open the test panel and take a measurement.
You have now verified the NI PXI-4224 configuration and signal
connection.