Nortel Networks Server 1005r - Manual (Page 26)

26 Chapter 3 Preparing for installation
WARNING
Risk of personal injury
The 1005r CallPilot server weighs approximately 20 kg (44 lb)
when it is shipped from manufacturing. To prevent personal injury,
have someone help you to unpack and position the server.
To unpack the equipment
Step Action
ATTENTION
As you unpack each item, check it off against the packing list, as well as against
the following checklists provided in the Installation and Configuration Task List
(NN44200-306):
• "CallPilot software media and documentation checklist"
• "CallPilot server hardware checklist"
1 Open the cardboard carton containing the server.
2 Remove the server from the carton; set it on a secure surface.
3 Open the cartons containing the monitor, keyboard, mouse,
modem, and ELAN Ethernet switch or hub (if supplied), and set the
peripherals aside.
4 Remove the dongle from the box and set it aside
5 Put all manuals, DVDs or CDs, operating system disks, and any
disks for peripherals in a safe place.
6 Save all packing materials and cartons in case you must return any
equipment to the carrier.
—End—
What is next?
Remove the front bezel cover so that you can inspect the front panel of the
server. See
"Removing the front bezel" (page 27) .
Nortel CallPilot
1005r Server Hardware Installation
NN44200-308 01.06 Standard
5.0 15 May 2008
Copyright © 2006-2008, Nortel Networks
.