NEC Express5800/120Rh-2 N8100-1126F - Manual (Page 139)

Configuring Your Server 4-43
5. On the main menu, make sure that the type of selected hard disk drive is changed to
"Spare", and its status "Optimal".
To unassign a spare disk, take the same steps from 1 to 4 except for selecting "Delete
Spare" instead of "Add Spare".
Boot Priority
To specify boot priority to an array:
1. Select an array you wish to set the boot priority from the main menu and press Enter.
2. Press B on the window showing the details of array.
Some characters may not be displayed correctly when console redirection is used. It is no
problem on operation. Ignore it and press B.